Portable Cold Gas Dynamic Spray Machine CSM108

Cold-gas-dynamic-spray-machine-CSM108

          

Techical parameters
Maximum compressed air input pressure 12 bar (170 psi)
Compressed air consumption 0.3-0.4 m3/min
Compressed air purity free of water and oil
Compressed air operating pressure
Compressed air operating temperature
(in the input of the nozzle) 200 – 600 °C
Power supply:
One-phase alternate current of 50±1 Hz and 220-240 V
Maximum power consumption 3.3 kW
Noise level in operation without shielded box not exceed 75 dB
Powder consumption 0,1-0,8 g/sec
Time required to reach operating condition no more than 10 seconds
Dimensions of the equipment :
Rack assembly – 250х260х300 mm
Spraying Gun  – 400х70 mm
Total mass of the equipment – 8.5 kg
Spraying Gun (with handle) – 1,8 kg
Adjustment of temperature
Powder supply adjustment.
One powder feeder.
Guarantee 1 year
 
Only for manual short time work, start level equipment
 
How to start?
 
At the first stage of work – cleaning of a surface with an abrasive of F80 grit, aluminum oxide. The abrasive is filled up in the powder feeder and the user begins cleaning of a surface. After completion of cleaning, the remains of an abrasive get enough sleep in a bottle.
 
At the second stage of work, in a container powder of metal or mix of powders of metals and abrasives is filled up. The user puts a layer of metal and does cleaning, he uses only to one equipment for two a stage in work.
 
Also fast training is very easy to work. But during the work it is necessary to use means of protection for eyes, hearing, temperature and breath.
For soft cleaning of a surface it is possible to use soda bicarbonate for soda blasting .
 

COLD  SPRAY TECHNOLOGY  IS APPLIED TO SPRAY VARIOUS METAL COATINGS ON THE BASE OF ALUMINUM, COPPER, ZINC, NICKEL, LEAD, TIN, BABBIT. DEPOSITION OF IRON, COBALT, VANADIUM AND SOME OTHER METALS IS ALSO POSSIBLE.
METAL COATINGS ARE USED FOR VARIOUS PURPOSES LIKE:
 
·         RESTORATION OF FORM AND SIZE OF METAL PARTS;
·         ELECTRIC CONTACT PADS DEPOSITION TO METAL, GLASS AND CERAMIC;
·         RESTORATION OF CASTING FLAWS AND MECHANICAL DEFECTS;
·         GAS- AND LIQUID-TIGHT SEALING (HERMETIC SEALING);
·         FRICTION PROTECTION (RESTORATION OF SLIDING BEARINGS);
·         CORROSION PROTECTION;
·         SEIZURE PROTECTION (ANTI-SEIZURE COATINGS);
·         SPARK PROTECTION (ANTI-SPARK COATINGS);
·         DECORATION.

Articles with CSM108  Low pressure cold gas dynamic spray machine:

Mixed-Material Feedstocks for Cold Spray Additive Manufacturing of Metal–Polymer Composites | Journal of Thermal Spray Technology

 Rowan University   STUDY   OF POLYMER-ON-POLYMER COLD SPRAY  DEPOSITION WINDOWS UNDER  APPARENTLY  SIMILAR CONDITIONS 

Thermoplastic coating on fiber reinforced polymer composites by cold spray additive manufacturing

Comments are closed.