Külmpihustuspulbrid ja varuosad

 we offer a wide selection of high-purity metal powders optimized for low-pressure cold spray technology. Our powders are carefully sieved to particle sizes of 10–30 microns, ensuring stable flow, strong adhesion, and consistent coating quality.

We supply:

  • Copper powder – for conductive and corrosion-resistant coatings

  • Zinc powder – for anti-corrosion surface treatment (galvanic replacement)

  • Nickel powder – for wear-resistant and structural repairs

  • Aluminum powder – for lightweight and reflective coatings

  • Tin powder – for soft metal bonding and special coatings

  • Copper-zinc alloys – for high-speed deposition and functional layers

All powders are dry, flowable, moisture-protected, and ready for industrial application in low pressure cold gas dynamic spray systems.

We support clients in:

  • Automotive restoration

  • Mould and tooling repair

  • Electronics and EMI shielding

  • Anti-corrosion metal protection

  • Cylinder and shaft refurbishment

  1. K-714, Aluminium Oxide, Nickel and Zinc Cold Spray Powder Mix. Heat-resistant coatings for protection of steel appliances. Metal mold shape restoration.
  2. K-32, Aluminium Oxide and Nickel Cold Spray Powder Mix .Electrical conductive coating for contact platforms of electrical equipment. Anti-corrosive and heat-resistant coatings for protection of steel appliances.
  3. T-25/T2-00-05, Aluminium Oxide and Tin Cold Spray Powder Mix. Anti-corrosive coating for contact areas of electric power connectors and other electrical equipment.
  4. B-83-100-40, Babbit Powder Mix. Restoration of slide bearings.
  5. K-00-04-16, Pure Alumina, Cold Spray Abrasive Material. Cleaning and abrasive preparation of steel or cast-iron surfaces for further coating with metal.
  6. K-01-11/C-01-11, Aluminium Oxide, Copper and Zinc Cold Spray Powder Mix. Filling of cavities, cracks or other defects of steel, cast-iron, bronze or brass appliances. Repair of units operating under temperatures up to 800°C Restoration of bearing seats in steel or cast-iron components.
  7. K-00-11/Z-00-11, Aluminium Oxide and Zinc Powder Mix. Corrosion protection at local surfaces of steel appliances or elements of steel components (including welding seams).
  8. K-01-01/C-01-01, Aluminium Oxide and Copper Cold Spray Powder Mix. Electrical contact coating on aluminum, steel, metal alloys, glass or ceramics. Coating of aluminum, steel, cast-iron, ceramic or glass surfaces for tin soldering.
  9. K-10-04/A-10-04, Aluminium Oxide and Aluminium Cold Spray Powder Mix. Prime layering for nickel and copper coating deposition on ceramic substrates.
  10. K-10-01/A-10-01, Aluminium Oxide and Aluminium Cold Spray Powder Mix. Corrosion protection, restoration of aluminum layer on clad alloys.
  11. K-20-11/A-20-11, Aluminium Oxide, Aluminium and Zinc Cold Spray Powder Mix. Repair of holes or cracks in metal radiators, condensers, heat exchangers etc. Repair of corrosion or mechanical damage, clamps, burnt holes, scratches, filling of cracks, dents or other defects in aluminum, steel or cast-iron appliances.
  12. K-80-13/A-80-13, Aluminium Oxide, Aluminium and Zinc Cold Spray Powder Mix. Repair of holes or cracks in metal radiators, condensers, heat exchangers etc. Repair of corrosion or mechanical damage, clamps, burnt holes, scratches, filling of cracks, dents or other defects in aluminum, steel or cast-iron appliances.
  13. A-20-10, Aluminum and Zinc Cold Spray Powder Mix. Sensitive conducting coatings at glass substrate.
  14. C-03-10, Copper and Zinc Cold Spray Powder Mix. Conducting coatings for soldering at glass substrate.
  15. C-01-00 , Pure Copper Powder. Auto-limited thinkness coatings for soldering.
  16. Round Nozzle CK20 with Nozzle Insert K6/CK20
  17. Rectangle Flat Nozzle SP9/K7 with Nozzle Insert P9/CK7
  18. Round Nozzle CK30/K35 with Ceramic Nozzle Insert K30
  19. Babbit Nozzle Set SBB-03. Includes: SK-10 nozzle; thermokinetic nozzle BKK-35 (sputtering spot 35 mm). The nozzle block allows you to eliminate damage and defects of sliding bearings (abrasions, scrapes, steps, scratches, chips) by spraying babbitt B83.
  20. Nozzle Adaptor 45 Degree
  21. Nozzle Adaptor 90 Degree
  22. Nozzle Extension U150, 150 mm
  23. Nozzle Extension U400, 400 mm
  24. A-1MC, Aluminium Oxide, Aluminium . Best for aluminium wheels , rims restoration and scratch repair.
  25. K/A-30-01, Aluminium Oxide, Aluminium . Best for aluminium wheels , rims restoration and scratch repair

Comments are closed.